Materials we use:

T100

Conventional application grade, able to work at 115℃ continuously in the long run; strong mechanical strength and high rigidity; more wearing resistant than general engineering plastic POM and PA;

T101

It contains solid lubricating agent and needs no creeping materials. Low friction coefficient and high load; wearing resistant and smooth operation.

T200

Applicable to the occasions with high load and high strength; able to work at 105℃ continuously in the long run.

T201

Softer than T100; no creeping materials required; low friction coefficient and high load; wearing resistant and smooth operation.

T202

Applicable to the occasions with extremely low temperature such as -200℃; low friction and high mechanical strength.

T300

Applicable to the occasions with oil-free lubrication, low load and high operating speed; able to work at 220℃ continuously in the long run and resist all kinds of corrosive media.

T301

Oil-free lubrication; better mechanical and wearing resistance performance than T300.

T302

Applicable to the wearing of metals such as copper and aluminum and free from bearing wearing; softer wearing resistant materials.

T400

Applicable to the occasions with oil-free lubrication, and high load, speed and temperature; able to work at 250℃ continuously in the long run and resist acid and alkaline.

T500

Applicable to the occasions with oil-free lubrication, and high load, speed and temperature; able to work at 315℃ continuously in the long run.

Such factors as function, temperature, load, operating speed, media and wearing materials must be considered while selecting materials.